If you looking for brushless dc motor controller then you are right place. We are searching for the best brushless dc motor controller on the market and analyze these products to provide you the best choice.
Reviews
1. uniquegoods CCMFC 12V 2A DC Motor Speed Controller Adjustable Variable Speed Switch PWM DC Voltage Switching Regulator control speed of a DC fan
Feature
Package including:1 x dc motor speed controller;1 x button switch (a gift free)Input supply voltage: 12VDC ; Output voltage range: 0.8V-11.3V
Item size:2.6*1.26*0.95 inches ; Net weight: 1.4 ounces
The maximum output power: 24W
The maximum continuous output current :2A; Suitable for the DC fan within 1A
Description
Features:CCMFC DC Motor Speed Controller provides variable speed capability for brush or brushless DC fans, or the fans without control line.
Input voltage: 12VDC
Suitable for the DC fan within 1A, Peak current 2A.
Low noise, small size.
Operating instruction:
Before you attempting to wire the controller, make sure power is off.
WARNING: DO NOT REVERSE POSTIVE AND NEGATIVE POWER LOADS AND DC FAN.THIS WILL DAMAGE THE CONTROLLER.
1.Connect wires refer to the product wiring diagram.(No.4 picture)
(Red wire connects the positive power; black wire connects negative power; white wire connects the positive of fan; green wire connects the negative of fan.)
2. Turn on the power, and adjust the potentiometer.
Package Including:
1 x DC Motor Speed Controller
1 x button switch (a gift free)
2. Yeeco DC 5-50V 380W High Power Motor Controller Driver Board, Brushless DC Motor Speed Regulator Control with Reversible Switch Forward/Reverse
Feature
Wide voltage range: DC 5-50V, 380W high power motor controllerSuitable for three phase brushless DC motor without hall sensor
Equipped with heat sink on the bottom for heat dissipation
Provide leads and switch polarity reverse control in package
Adopt SMT process, stable performance and with over-current protection
Description
Product name: 380W Brushless, No Hall Sensor DC Motor Driver Board
Working voltage: DC 5-50V
Maximum current: 20A
Maximum power: 380W
Over-current protection: Yes
Product size: Length 63mm x Width 45mm x Height 27mm
Weight: about 93g
Interface instruction:
1. MA MB MC phase line output connect to the motor;
2. 5V GND The motherboard comes with power supply;
3. VCC GND externally connect to DC power supply line;
4. SC rotating speed pulse signal output;
5. Z/ F: Forward/ Reverse direction control line, connected to 5V or GND to achieve forward or reverse direction rotation;
6. VR adjustable speed signal input, generally externally connecting the middle pin of 100K three-pin potentiometer to VR the other two pins are connected to the motherboard's 5V and GND.
Package include:
1xDC Motor Controller Board
3. KKmoon DC 12V-36V 500W Brushless Motor Controller Hall Motor Balanced Car Driver Board
Feature
SMT process, high quality.DC brushless motor driver board.
Operating voltage: DC 12V to 36V; operating current 15A.
With speed regulation function, 0.1V-5V speed voltage.
Stall protection, over-current protection, enable control, steering control and speed control signal.
Description
Specifications:Operating Voltage: DC12-36V
Operating Current: 15A
Drive Power: 500W
Speed Voltage: 0.1V-5V
Operating Temperature: -40~85C
Humidity: 90%RH
Stall Protection: Yes
Enable Control: Yes
Over-current Protection: Yes
Steering Control: Yes
Speed Control Signal: Yes
PCB Size: 63 * 42 * 17mm
Weight: 30g
Power terminal OUT:
VCC (positive power supply)
GND (negative one)
MC (motor phases W)
MB (motor phases V)
MA (motor phases U)
SET for the control side:
GND control terminal ground
VR the governor end 0-5V(corresponding to 10% of motor speed - 100%)
ZF reversing control(connected to 5V or ground can change the motor rotation direction)
M tachometer pulse output(depending on the number of motor poles corresponding to the number of pulses per revolution of the output number)
EL enable control terminal(connected to 5V or ground running then 5V, grounding the motor stops)
HALL for the Hall terminals:
5V, Hall power positive
Ha, Hall signal
Hb, Hall signal
Hc, Hall signal
GND, Hall negative
Note:
Due to different Hall motor manufacturers, the Hall line order may show difference from the pictures, you need to adjust the sequence.
If the line sequence is wrong, it will not work as expected, such as start-up abnormally, with large current or even burn the driver board.
Tips: If you use less than 60W, without additional heat sink; please make sure to add heat sink when exceed 60W.
When installing the heat sink, you must pay attention to the insulation for 6pcs MOS on the back of module. It will damage the driver board permanently without insulation.
Package List:
1 * Brushless Motor Controller
4. KOVPT 12V-48V Brushless DC Motor Controller
Feature
12V~48V Brushless DC Motor Controller, Used for Brushless DC Motors;Max Output Current:10A; Max Stall Current:6A; Hall Sensor Output Voltage:5V;
Motor Rated Current Setting Range: 0.5-10A; Load Current Setting Range: 0.5-12A(1.5*Rated Current);
Analog Input Voltage Range:0-5V;
Package: 1PCS x 12V~48V Brushless DC Motor Controller; More Specs and Items pls Click "KanzNan"
Description
12V~48V Brushless DC Motor Controller, Used for Brushless DC Motors5. Mophorn 1800W Electric Brushless DC Motor Kit 48V High Speed Brushless Motor with 32A Speed Controller and Throttle Grip Kit for Go Karts E-bike Electric Throttle Motorcycle Scooter and More (1800W)
Feature
Electric Brushless DC Motor - Length: 134mm; Speed: 4500rpm - 5200rpm.; Output Power: 1800W; Voltage: 48V; Motor Sproket: T8F 11TBrushless Controller - Rated voltage: dc 48 v; Current limit: 32A; Rated power: 1800w; Matching motor: dc brushless motor; Under Voltage Protection: 41V
Throttle grip - Style: Striae & Round; Operating voltage: 5V; Adjustment range: Minimum 1.0V; highest 4.0V; Function: high, medium and low grades governor
Powerfrugal and stable. Less electrical and electromagnetic noise. High efficiency: Brushless motors are typically 85-90% efficient.
The Brushless DC Motor Kit suits for electric throttle, motorcycle, scooter, go karts, e-bike, atv, mini bikes, pocket bikes and electric dirt bikes.
Description
1800W Brushless DC Motor Kit 48V High Speed Brushless Motor with 32A Speed Controller and Throttle Grip Kit for Go Karts E-bike Electric Throttle Motorcycle Scooter and MoreThe Brushless DC Motor Kit is powerfrugal and stable for low noise, long lifespan. It suits for electric throttle, motorcycle, scooter, go karts, e-bike, atv, mini bikes, pocket bikes and electric dirt bikes. You will receive a gearing silver Brushless motor of which length is 134mm with speed: 4500rpm - 5200rpm, A Brushless Controller Under 41V Protection, and A Throttle grip!
Feature:
Long lifespan
Powerfrugal and stable
Less electrical and electromagnetic noise
Suit for electric throttle, motorcycle, scooter etc.
High efficiency: Brushless motors are typically 85-90% efficient
Electric Brushless DC Motor:
Length: 134mm
Speed: 4500rpm - 5200rpm.
Output Power: 1800W
Voltage: 48V
Motor Sproket: T8F 11T
Brushless Controller:
Rated voltage: dc 48 v
Current limit: 32A
Rated power: 1800w
Matching motor: dc brushless motor
Under Voltage Protection: 41V
Throttle grip:
Style: Striae & Round
Operating voltage: 5V
Adjustment range: Minimum 1.0V; highest 4.0V
Function: high, medium and low grades governor
Package Content:
1 x Electric brushless Motor
1 x Speed Controller
1 x Throttle Grip
6. RioRand 7-80V PWM DC Motor Speed Controller Switch 30A
Feature
Potentiometer cableabout 15CM can be separated, with running stop brake functionSuitable for long hours of work:Circuit optimization design,stable
Adjust the motor smooth no noise no vibration,with power indication,wide duty cycle adjustment range
Using imported high-voltage MOS tube, three pressure 100V high-frequency low-resistance capacitors, automotive fuses
PWM frequency: 12KHZ
Description
Brand: RioRandProduct Specifications:
Applicable voltage range: DC 7-80V (80V is the maximum operating voltage please leave margin while using)
Drive current: maximum 30A(Current need to reduce relatively while working voltage is high)
Control power: 12V within 300W ; 24V within 400W ; 48V within 450W ; 72V within 500W
Duty cycle adjustable range: about 1% -100%
PWM frequency: 12KHZ
Note:
This product is DC brush motor speed controller, can not access AC power and drive brushless motor.If there is any questions, please feel free to contact us!
7. Qianson 360W 30A DC 12V 3-phase Brushless Motor Speed Control PWM Controller Driver
Feature
30A 3-phase Brushless Motor PWM Control Speed ControllerSafe boot, temperature protection , Programmable, High Power , Brake, linear recognition
This controller is design for High power High speed DC brushless motor
Nominal Power: 360W, Signal Voltage: 5V 0.5A
This controller only for 12V 3-phases motor
Description
Description:
This controller is design for High power High speed DC brushless motor
Rated Voltage: DC 6-12.8V (Recommened 12V. Not more than 12.8V)
Current Rating: 32A (Within 5s, max current can not exceed 40A)
Nominal Power: 360W
Signal Voltage: 5V 0.5A,
Temperature Protection: 110
Speed Range: 8%-98%
For Motor Poles: 2-18 pole
Start: flexible start/immediate start
Brake: reverse load/no brake
Speed signal: 8KHz/ 16KHz fixed frequency PWM
Servo test Function: 55g or Less
Programmable Function: Governor is based on MCU control microsystems, some features may make changes, base on the need of its programmable function (We don't provide instruction details)
Servo test Function: if you not use this function, please aviod it.
Small board Size: 24 x 32mm
Driver board size: 32 x 24 x 7mm
This controller only for 12V 3-Phase motor
If you need Three-phase Inner Rotor DC Brushless Motor , pls you buy it in link: https://www.amazon.com/dp/B01ICMP9SU
Package listing:
1x DC Brushless Motor Speed Controller (as first main photo shows)
8. Brushless DC Motor Speed Controller, DROK DC 6-50V Three-phrase Brushless Sensorless Motor Control Board 12v 24v BLDC Motor Driver Regulator Monitor 380W PWM Speed Controller Module with Heat Sink
Feature
DROK motor control board operation voltage range is DC 6-50V, highest power is 380W, rated current is 16A, MAX output current is 20A.The motor speed controller is fit for DC brushless three-phase motors without Hall sensor.
PLC PWM Signal Control: the BLDC circuit is a new version, supports PLC 0-5V PWM signal control.
Speed Control Function: this brushless motor controller module is with controlling switch, convenient to regulate the motor speed.
Over Current Protection: the dc motor controller module is designed with over current protection, will be shut down the module and no output if over current.
Description
DROK BLDC Motor ControllerParameters:
Operation voltage range: 6-50V
Rated current: 16A
Max output current: 20A
Max power: 380W
Over-current protective function: Yes
The highest rotating speed: 10000~15000 revolutions
Dimension: 63x45x30mm
Wiring Ports:
1. MA MB MC: phrase line output connects to the motor
2. 5V GND: mainboard built-in power supply (the current cannot be exceeded 30MA)
3. VCC GND: the motor power supply (connect to external DC power supply)
4. SC: output pulse signal of rotating speed
5. Forward and reverse control: forward and reverse rotation control (or can be connected to the external switch)
6. VR: speed control signal input (with an onboard potentiometer for speed regulation, can also be connected to external 0-5V analog simulation, PWM duty cycle, support dual signal input speed regulation)
Notes:
1. We recommend adding the fuses, as without fuses on the power supply circuit of the motherboard. The reversed connection will cause some of the chip permanent damage.
2. In the normal operation, the motor output has the over-current protection. Please do not artificially short-circuit, because the module power current is large. Once short-circuit, has the possibility of burning line tube. Please use low current low-voltage testing in the first wiring test; then connect the larger current and voltage. Due to the bare board module sold, please attention wiring thread insulation and prohibited strong voltage touch onboard parts.
3. Do not connect the drive motor which has obviously inconsistent voltage, current, power, to avoid the unreasonable damage.
Package Includes:
1 x DC Brushless Motor Driver Board
9. DC 5V-36V 15A 3-Phase Brushless Motor Controller CW CCW Reversible Switch
Feature
This speed controller switch is for3-Phase brushless motor, and support motor CW CCWStable performance, simple and most cost-effective multi-function operation
The speed of the motor can be regulated by the potentiometer, easy to use
With wide voltage range, DC5-36V, and protective current is 15A
Small size and elegant appearance
Description
Features:This speed controller switch is for 3-Phase brushless motor, and support motor CW CCW Stable performance, simple and most cost-effective multi-function operation. The speed of the motor can be regulated by thepotentiometer, easy to use.
With wide voltage range, DC5-36v, and protective current is 15A. Small size and elegant appearance.
Specifications:
Input voltage: DC5-36v
Output current: <15A
Protective current: 15A
CW CCW: support
Speed regulating mode: potentiometer (270 degree linear)
Speed adjustment range: 0-100%
support for Motor: brushless motor
Connection type: fence type terminal
Knob specification: 100K (with switch)
Module size: 8 x 6 x 2.8cm/3.15 x 2.36 x 1.1inch
Weight: 87g
Package Included:
1 x Motor Speed Controller
Note:
1.The input voltage must be divided into positive and negative and cannot enter 220V home power
2.The input voltage shall be equal to the rated voltage of the motor (5-36v).
3. Motor line ABC,no sequence of distinction
10. 15 Mosfets 48-84v 1500w 45amax Dual Mode Sensor/sensorless Brushless Dc Motor Controller
Feature
Low Voltage, Over-current protectionE-ABS/high level/low level brake
Regen brake (with on/off switch)
Cruising control
3 Speed (we usually make the standard 3 speed 50%-100%-120%, when you do not use the switch, the speed is 100%)