Finding your suitable bmp085 bmp180 is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best bmp085 bmp180 including detail information and customer reviews. Let’s find out which is your favorite one.
Reviews
1. HiLetgo GY-68 BMP180 Digital Barometric Pressure Sensor Module Replace BMP085 for Arduino
Feature
BMP180 is a high-precision, small size, ultra-low power pressure sensor that can be used in mobile devicesIts performance excellence, the absolute accuracy of the lowest can reach 0.03hPa, and low power consumption, only 3A
BMP180 powerful 8-pin ceramic leadless chip carrier (LCC) ultra-thin package, you can directly through the I2C bus connected with a variety of microprocessors
Pressure range: 300 ~ 1100hPa (9000 meters above sea level ~ -500 meters)
Low power consumption: 5A in standard mode
Description
IntroductionMeasuring the absolute pressure of the enviroment using a digital barometer such as this has some interesting applications. By converting the pressure measured into altitude, you have a reliable sensor for determining the height of your robot, plane or projectile!
Using a sensor as capable as the BMP180 you can achieve accurary of 1m, with noise of only 17cm in ultra high resolution noise. The device will operate at only 0.3uA meaning low current draw for battery powered applications.
The BMP180 comes fully calibrated and ready to use. As the device operates over I2C we've added optional I2C pull ups that can be enabled using the PU (pull up) jumper on the board for your convenience and ease during breadboarding.
Using I2C, the device provides pressure and temperature as 16bit values, which are used along with calibration data within the device are used to provide a temperature compensated altitude calculation.
Features:
1.8V to 3.6V Supply Voltage
Low power consumption - 0.5uA at 1Hz
I2C interface
Max I2C Speed: 3.5Mhz
Very low noise - up to 0.02hPa (17cm)
Full calibrated
Pressure Range: 300hPa to 1100hPa (+9000m to -500m)
Package Included
1*GY-68 BMP180 Digital Barometric Pressure Sensor Module
2. Solu BMP180 Replace BMP085 Digital Barometric Pressure Sensor Board Module Arduino//BMP180 Replace BOSCH Digital Barometric Pressure Sensor Board Module Arduino
Feature
About us (Solu ), Professional factory of circuit boards for Arduino, welcome to our store for more choices with best price. What we pursue is your satisfication of our service, not just for our goods.For any reason you are unsatisfied with our product at any time, simply contact support for exchange or refund. we will reply you about any question you ask within 24 hoursThis module is precise, small and ultra-low power consumtion is 3A. It can be used in mobile devices.It boast of good Performance and the lowest absolute accuracy can achieve 0.03hPa.
Usually, you will get it actually in 9~19 days, If you are in the USA and the item is NOT Fulfilled by Amazon. the item will be sent to you by USPS with shipping information from China. The estimated delivery time offered by Amazon is not the real time. Your patience is highly appreciated. Hope you will receive your item soon and enjoy using it.
BMP180 makes use of the powerful 8-pin ceramic leadless chip carrier (LCC) ultra-thin package and it can be connected directly with a variety of microprocessor via the I2C bus.
Can use in GPS precision navigation (dead reckoning, up and down the bridge detection, etc.) ,indoor and outdoor navigation, leisure, sports and medical health monitoring,weather Forecast ,vertical speed indicator (rising / sinking speed) ,fan Power Control.
Description
About us (Solu), Professional factory of circuit boards, welcome to our store for more choices with best price. What we pursue is your satisfication of our service, not just for our goods.For any reason you are unsatisfied with our product at any time, simply contact support for exchange or refund. we will reply you about any question you ask within 24 hoursSpecifications :
Supply Voltage:1.8V to 3.6V(VDDA), 1.62V-3.6V(VDDD)
Pressure ranges from 300 to 1100hPa(Altitude9000m-500m)
Low power consumption: 5A
LCC package
Resolution is 0.06hPa(Altitude 0.5m) in low power consumtion model,while it's 0.03hPa(0.25M) in high liner model.
This module is compliant to RoHS without lead.
MSL 1 reaction time: 7.5ms
Standby Current: 0.1A
It doesn't need external clock circuit.
This product can be applied to GPS precision navigation, weather forecast, vertical speed indication and so on.
Package Includes :
*1X BMP180 Pressure Sensor Board Module
3. SODIAL(R) BMP180 Digital pressure sensor board module 8-pin For Arduino spare BMP085
Feature
This module is small and accurate, Very low power consumption of 3 miniamperes. This can be used in mobile devices.This has a good performance, Absolute accuracy of the lowest will be able to achieve the 0.03hPa.
BMP180 take advantage of the ultra-thin package of powerful 8-pin ceramic leadless chip carrier (LCC), Via the I2C bus,It can be connected directly with a variety of connectors of the miniprocessor.
It can be used in GPS accuracy navigation(Dead reckoning, up and bridge detection down)Indoor and outdoor navigation, leisure, sports,Medical health monitoring, weather forecast, vertical velocity,(Rise / sink speed) , fan power control
Description
BMP180 Digital pressure sensor board module 8-pin For Arduino spare BMP085Color: As shown
Size: 1.4 1.2 cm
Power supply voltage: 300 to 1100 hPaAltitude 9000 meters, 500 meters
Low power consumption of 1.8~3.6 V (VDDA) 1.62V-3.6V (VDDD)
Pressure range:In a high-liner model 5 low power consumption model and miniamps LCC package dissolved 0.06mPaHeight 0.5 m, On the other hand 0.03mPa0.25M.
MSL1 response time: 7.5 seconds Standby current: 0.1 A.
It does not need an external clock circuit
Accurate navigation, weather forecast, vertical speed indicator, you can apply for GPS.
Package contents: 1 BMP180 Air pressure sensor board module
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/-1-3 cm.
4. WillBest 10PCS GY-68 BMP180 GY68 Replace BMP085 Digital Barometric Pressure Sensor Board Module for Arduino
Description
10PCS GY-68 BMP180 GY68 Replace BMP085 Digital Barometric Pressure Sensor Board Module For Arduino5. GY-68 3.3V/5V BMP180 Temperature Module Barometric Sensor Replace BMP085
Feature
Measuring the absolute pressure of the enviroment using a digital barometer such as this has some interesting applications. By converting the pressure measured into altitude, you have a reliable sensor for determining the height of your robot, plane or projectile!Using a sensor as capable as the BMP180 you can achieve accurary of 1m, with noise of only 17cm in ultra high resolution noise. The device will operate at only 0.3uA meaning low current draw for battery powered applications.
The BMP180 comes fully calibrated and ready to use. As the device operates over I2C we've added optional I2C pull ups that can be enabled using the PU (pull up) jumper on the board for your convenience and ease during breadboarding.
Using I2C, the device provides pressure and temperature as 16bit values, which are used along with calibration data within the device are used to provide a temperature compensated altitude calculation.
Description
1pcs6. Willwin 2pcs GY-68 BMP180 Digital Barometric Pressure Sensor Module Replace BMP085 for Arduino
Feature
100% Brand New,Perfect for your Arduino projectBMP180 is a high precision, small size, ultra-low power pressure sensor
Lowest absolute accuracy can be achieved 0.03hPa, and low power consumption, only 3A
BMP180 uses a powerful 8-pin leadless ceramic chip can be directly connected with a variety of microprocessor via I2C
Package Content : 2 x BMP180
Description
This precision sensor is the best low-cost sensing solution for measuring barometric pressure and temperature.Because pressure changes with altitude you can also use it as an altimeter.
The sensor is soldered onto a PCB with a 3.3V regulator, I2C level shifter and pull-up resistors on the I2C pins.
Using the sensor is easy. If you're using an Arduino, simply connect the VIN pin to the 5V voltage pin, GND to ground, SCL to I2C Clock (Analog 5) and SDA to I2C Data (Analog 4).
Download the BMP180 Arduino library and example code for temperature, pressure and altitude calculation.
Immediately you'll have precision temperature, pressure and altitude data.
7. Value-Trade-Inc - GY-68 3.3V/5V BMP180 Temperature Module Barometric Sensor Replace BMP085
Feature
100% Brand new and High quality.Electronic tool equipment Smart-family, Repair tools for the Smart family, General electronic components, Electronic circuit board... The product as described in the picture.
Excellent quality, fast delivery, simple after-sales. We make every effort to provide customers with satisfactory service.
80% conventional orders will be delivered within 15-20 days.
Please note that the products are only offered by the brand: Value.Trade.Inc. Other sales people is not reliable.
Description
Features:
VCC is 5V, the output of the high level 3.3V, can be 5v power supply, which has a voltage conversion chip, but 5v and 3.3v can only choose a power supply mode, select the 3.3v can not use 5v 5v can not be selected 3.3v
BMP180 is a high-precision, small size, ultra-low power consumption of the pressure sensor can be used in mobile devices
Its performance is excellent, the absolute accuracy of the minimum can reach 0.03hPa, and low power consumption, only 3A
BMP180 with a powerful 8-pin ceramic leadless chip carrier (LCC) ultra-thin package, can be directly through the I2C bus with a variety of microprocessors connected
Main feature:
Pressure range: 300 ~ 1100hPa (elevation of 9000 meters to -500 meters)
Power supply voltage: 1.8V ~ 3.6V (VDDA), 1.62V ~ 3.6V (VDDD)
LCC8 Package: Lead-Free Ceramic Carrier Package (LCC)
Size: 3.6x3.8x0.93CM
Low power consumption: 5A in standard mode
High precision: low power mode, the resolution of 0.06hPa (0.5 meters)
High linear mode, the resolution of 0.03hPa (0.25 m)
Contains temperature output
I2C interface
Temperature compensation
Lead free, RoHS compliant
MSL 1 reaction time: 7.5ms
Standby current: 0.1A
No external clock circuit required
Typical application:
GPS accurate navigation (dead reckoning, upper and lower bridge detection, etc.)
Indoor and outdoor navigation
Leisure, sports and health care and other monitorin
Weather forecast
Vertical speed indication (rise / sink speed)
Fan power control
Package included:
1*3.3V/5V GY-68 BMP180 Temperature Module Barometric Sensor Replace BMP085
8. Diymore Atmospheric 3.3V BMP280 Pressure Sensor Module Breakout Board Replace BMP180 BMP085 for Arduino
Feature
It has stepped up their game with their new BMP280 sensor.An environmental sensor with temperature.
This sensor is great for all sorts of weather sensing and can even be used in both I2C and SPI!
This precision sensor is the best low-cost, precision sensing solution.
Pressure changes with altitude, and the pressure measurements are so good, you can also use it as an altimeter with 1 meter accuracy.
Description
It has stepped up their game with their new BMP280 sensor, an environmental sensor with temperature.Barometric pressure that is the next generation upgrade to the BMP085/BMP180/BMP183.
This sensor is great for all sorts of weather sensing and can even be used in both I2C and SPI!
This precision sensor is the best low-cost, precision sensing solution for measuring barometric pressure with 1 hPa absolute accuracy, and temperature with 1.0C accuracy.
Because pressure changes with altitude, and the pressure measurements are so good, you can also use it as an altimeter with 1 meter accuracy.
Typical application:
Enhancement of GPS navigation(e.g.time-to-first-fix improvementdead-reckoningslope detection)
Indoor navigationfloor detectionelevator detection
Outdoor navigationleisure and sports applications
Weather forecast
Health care applicatione.g. sirometry
Vertical velocity indicatione.g. risk/sink speed
Target devices
Handsets such as mobile phones ,table PCs,GPS devices
Navigation systems
Portable health caredevices
Home weather stations
Flying toys
Watches
Packge Included:
1 x BMP280 Pressure Sensor Module Arduino High Precision Atmospheric Replace BMP180
9. Sensor board module - TOOGOO(R) BMP180 Digital pressure sensor board module 8-pin For Arduino spare BMP085
Feature
This module is small and accurate, Very low power consumption of 3 microamperes. This can be used in mobile devices.This has a good performance, Absolute accuracy of the lowest will be able to achieve the 0.03hPa.
BMP180 take advantage of the ultra-thin package of powerful 8-pin ceramic leadless chip carrier (LCC), Via the I2C bus,It can be connected directly with a variety of connectors of the microprocessor.
It can be used in GPS accuracy navigation(Dead reckoning, up and bridge detection down)Indoor and outdoor navigation, leisure, sports,Medical health monitoring, weather forecast, vertical velocity,(Rise / sink speed) , fan power control
Description
* TOOGOO is a registered trademark. ONLY Authorized seller of TOOGOO can sell under TOOGOO listings. Our products will enhance your experience to unparalleled inspiration.Sensor board module - TOOGOO(R) BMP180 Digital pressure sensor board module 8-pin For Arduino spare BMP085
Color: As shown
Size: 1.4 1.2 cm
Power supply voltage: 300 to 1100 hPaAltitude 9000 meters, 500 meters
Low power consumption of 1.8~3.6 V (VDDA) 1.62V-3.6V (VDDD)
Pressure range:In a high-liner model 5 low power consumption model and Microamps LCC package dissolved 0.06mPaHeight 0.5 m, On the other hand 0.03mPa0.25M.
MSL1 response time: 7.5 seconds Standby current: 0.1 A.
It does not need an external clock circuit
Accurate navigation, weather forecast, vertical speed indicator, you can apply for GPS.
Package contents: 1 BMP180 Air pressure sensor board module
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/-1-3 cm.