Finding your suitable bulkhead pipe fittings is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best bulkhead pipe fittings including detail information and customer reviews. Let’s find out which is your favorite one.
Reviews
1. RAINPAL BBF020 Brass Bulkhead Tank Fitting (1/2 inch Female Pipe and 3/4" Male Garden Hose Threaded) (1)
Feature
NOW shipping Lead Free Compliant Version, Please note: Lead Free Compliant is Not 100% Lead Free. Contains less than 0.25% lead.1/2 inch Female Pipe Threaded Inside, all the way through, install 1/2 inch hose bibb, faucet etc on either end
3/4 inch Male Garden Hose Threaded, connect any garden hose to this fitting
Embeded Gasket Provides Strong Seal without Slipping.
Need 27 mm or 1-1/16 to 1-1/8 inch diameter hole to install
Description
California prop 65 warning: This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hand after use.2. Legines Brass Pipe Fitting, Female Anchor Bulkhead Coupling, Bulkhead Tank Fitting, Frame Nipple, 1/4" NPT Female,3/4-16UNF) 0.98" Male, 15/16" Length (Pack of 2)
Feature
Female coupler for connecting NPT fittings through a bulkheadBrass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
Washer and nut for air tight seal through bulkhead
1,200 psi maximum working pressure
Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F)
Description
Description:
This bulkhead fitting is suitable for connecting brass, bronze, or iron hydraulic lines through a bulkhead. The bulkhead fitting has 1/4" National Pipe Taper Fuel (NPTF) female ends. A washer and nut create an air-tight seal with the bulkhead. The fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. It has a working pressure of up to 1,200 pounds per square inch (psi).
Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, polybutylene terephthalate (PBT), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various applications, including machine tools, airplane and truck controls, and automated production lines, among others.
Specification:
-Maximum working pressure: Operating pressure UP to 1200psi
-Item Shape: Coupling
-Measurement System: inch
3. Legines Brass Pipe Fitting, Bulkhead Coupling Tank Fitting, 3/8" NPT Female, 1.31" Length (Pack of 2)
Feature
Female coupler for connecting NPT fittings through a bulkheadBrass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
Washer and nut for air tight seal through bulkhead
1,200 psi maximum working pressure
Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F)
Description
Description:
This bulkhead fitting is suitable for connecting brass, bronze, or iron hydraulic lines through a bulkhead. The bulkhead fitting has 3/8" National Pipe Taper Fuel (NPTF) female ends. A washer and nut create an air-tight seal with the bulkhead. The fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. It has a working pressure of up to 1,200 pounds per square inch (psi).
Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, polybutylene terephthalate (PBT), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants.
4. RAINPAL F075RH Brass Bulkhead Tank Fitting (Female 3/4" Straight Pipe Threaded, Right Handed Nut) (6)
Feature
Solid Brass Heavy Duty Bulkhead Tank Fitting. Weight: 3.4 ozFemale 3/4 Inch Straight Pipe Threaded All the way
Need 1-1/4 Inch or 32mm Diameter Hole to install, Fit up to 0.4 Inch or 10 mm thickness wall.
NOT Lead Free, Designed for Irrigation with Rain Barrel, NOT for Potable Water
Right Handed Nut for easy uninstalltion. Do not apply any grease on the gasket.
Description
California prop 65 warning: This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hand after use. NOT for potable water use.5. Banjo TF075 Polypropylene Bulkhead Tank Fitting, 3/4" NPT Female
Feature
USADescription
You can use this BANJO bulkhead tank fitting as an inlet or outlet for faucets, pipes, and spigots. Can be mounted in walls, tanks, or panels Includes a body, gasket, and locking nut with wrench flats Bulkhead Tank Fitting, Body Material Polypropylene, Pipe Size 3/4 In., Connection Type FNPT x FNPT, Required Hole Size 1-5/8 In., Gasket Material EPDM, Max. Pressure 150 psi, Length 3/4 In., Temp. Range -20 Degrees to 150 Degrees F, Color Black6. Malida 1/4" inch White Fittings Bulkhead Connector Tube Quick Connect for RO Unit (Pack of 5)
Feature
1/4 inch Bulkhead Connector.1/4" inch Water tube Fittings Bulkhead Connector Tube Quick Connect
Clip-Free,Easier installation.
Description
1/4 inch Bulkhead Connector. Union Elbow Quick Connect RO Water Filter Fitting Apply to Reverse Osmosis Water System and Housing In Line Filters7. Banjo TF150 Polypropylene Bulkhead Tank Fitting, 1-1/2" NPT Female
Feature
Price For: Each Max. Pressure: 150 psi Gasket Material: EPDM Item: Bulkhead Tank Fitting Body Material: Polypropylene Color: Black Connection Type: FNPT x FNPT Temp. Range: -20 Degrees to 150 Degrees F Required Hole Size: 3" Pipe Size: 1-1/2" Length: 1" Country of Origin (subject to change): United StatesDescription
'Bulkhead Tank Fitting, Body Material Polypropylene, Pipe Size 1-1/2 In., Connection Type FNPT x FNPT, Required Hole Size 3 In., Gasket Material EPDM, Max. Pressure 150 psi, Length 1 In., Temp. Range -20 Degrees to 150 Degrees F, Color Black'8. Banjo TF050 Polypropylene Bulkhead Tank Fitting, 1/2" NPT Female
Feature
Price For: Each Max. Pressure: 150 psi Gasket Material: EPDM Item: Bulkhead Tank Fitting Body Material: Polypropylene Color: Black Connection Type: FNPT x FNPT Temp. Range: -20 Degrees to 150 Degrees F Required Hole Size: 1-5/8" Pipe Size: 1/2" Length: 1/4" Country of Origin (subject to change): United StatesDescription
' Bulkhead Tank Fitting, Body Material Polypropylene, Pipe Size 1/2 In., Connection Type FNPT x FNPT, Required Hole Size 1-5/8 In., Gasket Material EPDM, Max. Pressure 150 psi, Length 1/4 In., Temp. Range -20 Degrees to 150 Degrees F, Color Black '9. Legines Brass Pipe Fitting, Bulkhead Coupling, Bulkhead Tank Fitting, Frame Nipple, 1/4" NPT Female,3/4-16UNF) 0.98" Male, 15/16" Length (5 pcs)
Feature
Female coupler for connecting NPT fittings through a bulkheadBrass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
Washer and nut for air tight seal through bulkhead
1,200 psi maximum working pressure
Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F)
Description
Description:
This bulkhead fitting is suitable for connecting brass, bronze, or iron hydraulic lines through a bulkhead. The bulkhead fitting has 1/4 inch National Pipe Taper Fuel (NPTF) female ends. A washer and nut create an air-tight seal with the bulkhead. The fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. It has a working pressure of up to 1,200 pounds per square inch (psi).
Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, polybutylene terephthalate (PBT), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various applications, including machine tools, airplane and truck controls, and automated production lines, among others.
Specification:
-Maximum working pressure: Operating pressure UP to 1200psi
-Item Shape: Coupling
-Measurement System: inch
10. Anderson Metals 00397 Brass Pipe Fitting, Anchor Coupler, 3/8" NPT Female, 1.31" Length
Feature
Anchor coupler for connecting two pipesFemale NPT threads with locknut for connecting to male threaded pipes
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
Operating temperature range of -65 to 250 degrees F
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
Description
This Anderson Metals 00397 anchor coupler is a 1.31" long brass pipe fitting with 3/8" female NPT threads. The anchor coupler connects two pipes of different diameters going in the same direction to extend a straight run. It has female National Pipe Taper (NPT) threads for connecting to male threaded pipes, creating a tighter seal than straight threads. This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Brass can be connected to copper, brass, plastic, aluminum, and welded steel. This fitting has an operating temperature range of -65 to + 250 degrees F. The anchor coupler has fair vibration resistance and is suitable in low to medium pressure applications.
Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
Anderson Metals manufactures brass fittings, valves, and pipe nipples. The company, founded in 1951, is headquartered in Kansas City, MO.